 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Luminosity Full Color LED 61-13/S3GHBHC-B04/ET Features Super-luminosity chip LED. White SMT package. Built in Red, Green, and Blue chips. Lead frame package with individual 6 pins. Wide viewing angle. Soldering methods: IR reflow soldering. Pb-free. ESD protection. The product itself will remain within RoHS compliant version. Descriptions Due to the package design, 61-13 has wide viewing angle , low power consumption and adjusting each color is possible thanks to serial connection by 6 terminal connection (Individual driving by each terminal) in case of using several number of LED. And makes it ideal for light pipe application. Applications Amusement equipment. Information boards. Flashlight for digital camera of cellular phone. Device Selection Guide Chip Lens Color Type S3 GH BH Material AlGaInP InGaN InGaN Emitted Color Reddish Orange Brilliant Green Blue Water Clear Everlight Electronics Co., Ltd. Device No.: DSE-613-010 http://www.everlight.com Prepared date: 08-Nov-2006 Rev. 1 Page: 1 of 14 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO.,LTD. 61-13/S3GHBHC-B04/ET Package Outline Dimensions 3 2 1 3 2 1 4 5 6 4 5 6 Notes: 1.All dimensions are in millimeters. 2.Tolerances unspecified are 0.1mm. Everlight Electronics Co., Ltd. Device No.: DSE-613-010 http://www.everlight.com Prepared date: 08-Nov-2006 Rev. 1 Page: 2 of 14 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO.,LTD. 61-13/S3GHBHC-B04/ET Absolute Maximum Ratings (Ta=25) Parameter Reverse Voltage Symbol VR R6 Forward Current IF GH BH R6 Power Dissipation Pd GH BH R6 Peak Forward Current(Duty 1/10 @ 1KHZ) IFP GH BH R6 Electrostatic Discharge ESD GH BH Operating Temperature Storage Temperature Soldering Temperature Topr Tstg Tsol Hand Soldering : 350 for 3 sec. Rating 5 50 25 25 120 110 110 100 100 100 2000 2000 2000 -40 ~ +85 -40~ +90 Reflow Soldering : 260 for 10 sec. V mA mA mA Unit V Everlight Electronics Co., Ltd. Device No.: DSE-613-010 http://www.everlight.com Prepared date: 08-Nov-2006 Rev. 1 Page: 3 of 14 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO.,LTD. 61-13/S3GHBHC-B04/ET Electro-Optical Characteristics (Ta=25) Parameter Symbol S3 Luminous Intensity Iv GH BH Viewing Angle 21/2 S3 Peak Wavelength p GH BH S3 Dominant Wavelength d GH BH S3 Spectrum Radiation Bandwidth GH BH S3 Forward Voltage Min. 180 450 112 ----------------613.5 520.0 465.0 ------------1.8 3.0 3.0 Typ. ------------120 632 518 468 ------------20 35 35 --------- Max. 360 900 225 ----------------618.5 525.0 470.0 ------------2.4 3.6 3.6 Unit Condition IF=20mA mcd IF=20mA IF=20mA deg IF=20mA nm IF=20mA nm IF=20mA nm IF=20mA VF GH BH V IF=20mA Notes: 1. 2. 3. Tolerance of Luminous Intensity 11% Tolerance of Dominant Wavelength 1 nm Tolerance of Dominant Forward Voltage 0.1V Everlight Electronics Co., Ltd. Device No.: DSE-613-010 http://www.everlight.com Prepared date: 08-Nov-2006 Rev. 1 Page: 4 of 14 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO.,LTD. 61-13/S3GHBHC-B04/ET Bin Range Of Luminous Intensity Symbol Bin Code S1 S3 S2 T1 U1 Iv GH U2 V1 R1 BH R2 S1 Bin Range Of Dominant Wavelength Symbol S3 d Min. 180 225 285 450 565 715 112 140 180 Min. 613.5 520.0 465.0 Max. 225 285 360 565 715 900 140 180 225 Max. 618.5 525.0 470.0 Unit Condition mcd IF =20mA Bin Code ---------- Unit Condition GH BH nm IF =20mA Notes: 1. Tolerance of Luminous Intensity 11% 2. Tolerance of Dominant Wavelength 1 nm Everlight Electronics Co., Ltd. Device No.: DSE-613-010 http://www.everlight.com Prepared date: 08-Nov-2006 Rev. 1 Page: 5 of 14 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO.,LTD. 61-13/S3GHBHC-B04/ET Bin Range Of Forward Voltage Symbol Bin Code S1 S3 S2 S3 G1 VF Min. 1.8 2.0 2.2 3.0 3.2 3.4 3.0 3.2 3.4 Max. 2.0 2.2 2.4 3.2 3.4 3.6 3.2 3.4 3.6 Unit Condition GH G2 G3 B1 V IF =20mA BH B2 B3 Notes: 1. Tolerance of Forward Voltage 0.1 V Everlight Electronics Co., Ltd. Device No.: DSE-613-010 http://www.everlight.com Prepared date: 08-Nov-2006 Rev. 1 Page: 6 of 14 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO.,LTD. 61-13/S3GHBHC-B04/ET Typical Electro-Optical Characteristics Curves (BH) Everlight Electronics Co., Ltd. Device No.: DSE-613-010 http://www.everlight.com Prepared date: 08-Nov-2006 Rev. 1 Page: 7 of 14 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO.,LTD. 61-13/S3GHBHC-B04/ET Typical Electro-Optical Characteristics Curves (GH) Everlight Electronics Co., Ltd. Device No.: DSE-613-010 http://www.everlight.com Prepared date: 08-Nov-2006 Rev. 1 Page: 8 of 14 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO.,LTD. 61-13/S3GHBHC-B04/ET Typical Electro-Optical Characteristics Curves (S3) Everlight Electronics Co., Ltd. Device No.: DSE-613-010 http://www.everlight.com Prepared date: 08-Nov-2006 Rev. 1 Page: 9 of 14 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO.,LTD. 61-13/S3GHBHC-B04/ET Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Device No.: DSE-613-010 http://www.everlight.com Prepared date: 08-Nov-2006 Rev. 1 Page: 10 of 14 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO.,LTD. 61-13/S3GHBHC-B04/ET Loaded quantity per reel 800 PCS/reel Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. Device No.: DSE-613-010 http://www.everlight.com Prepared date: 08-Nov-2006 Rev. 1 Page: 11 of 14 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO.,LTD. 61-13/S3GHBHC-B04/ET Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level90% LTPD10% No. 1 Items Reflow Soldering Test Condition Temp. : 2605 Min. 5sec. H : +100 15min 5 min L : -40 15min H : +100 5min 10 sec L : -10 5min Temp. : 100 Temp. : -40 IF = 20 mA 85/ 85%RH Test Sample Hours/Cycles Size 6 Min. 300 Cycles 22 PCS. Ac/Re 0/1 2 Temperature Cycle 22 PCS. 0/1 3 Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity 300 Cycles 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs. 22 PCS. 0/1 4 5 6 7 22 PCS. 22 PCS. 22 PCS. 22 PCS. 0/1 0/1 0/1 0/1 * For each die Everlight Electronics Co., Ltd. Device No.: DSE-613-010 http://www.everlight.com Prepared date: 08-Nov-2006 Rev. 1 Page: 12 of 14 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO.,LTD. 61-13/S3GHBHC-B04/ET Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 C / Sec. 260C. Max. 10 Sec. Max. 1~5 C / Sec. Pre-heating 180~200C 60 Sec. Max. Above 220C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. Device No.: DSE-613-010 http://www.everlight.com Prepared date: 08-Nov-2006 Rev. 1 Page: 13 of 14 Prepared by: Josh Chou EVERLIGHT ELECTRONICS CO.,LTD. 61-13/S3GHBHC-B04/ET 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. Device No.: DSE-613-010 http://www.everlight.com Prepared date: 08-Nov-2006 Rev. 1 Page: 14 of 14 Prepared by: Josh Chou |
Price & Availability of 61-13-S3GHBHC-B04-ET
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |